Red Suspension Arm 16101-6038 - SCY 16201 16101 PRO Spare Part
Regular price
21,90€
Sale price
21,90€
Regular price
Unit price/ per
Sale
Sold out
x1
1
article
21,90€
5% discount
x2
2
items
43,80€
41,62€
10% discount
x3
3
items
65,70€
59,13€
In stock | Ships within 24/48 hours
Be careful, there are only
items in stock!
Victim of his own success
15
In stock | Ships within 24/48 hours
Couldn't load pickup availability
Broken Suspension Arm = Session Over
Did you break a suspension arm during a jump or impact? Is your vehicle no longer driving straight and the wheel rubbing against the chassis? Suspension arms are the most stressed parts of your RC: they absorb all shocks, all jumps, all stresses. When an arm breaks, your session stops immediately.
These 16101-6038 Red Suspension Arms are the exact original parts factory-installed on the PRO versions of your SCY. They instantly restore the original suspension geometry, allowing your vehicle to drive perfectly straight again.
What These Suspension Arms Change for Your RC
💪 Original Strength: These arms are made from the same material as the original parts. They offer the same optimal balance between strength and flexibility.
🎯 Perfect Geometry: These arms restore the exact original suspension geometry. Your vehicle drives perfectly straight again, without misalignment.
🔴 Distinctive Red Color: These red arms are specific to the PRO versions. They allow you to visually identify your setup.
🔧 Simple Installation: You unscrew the old parts, screw in the new ones, and you’re done. 10 minutes flat per arm.
Verified Compatibility
These suspension arms are compatible with the following models:
• SCY 16201 • SCY 16101 PRO
Technical Specifications
Reference: 16101-6038
Color: Red (PRO version)
Type: Front and rear suspension arms
Material: Original reinforced plastic
FAQ: Drivers’ Questions
Expand to see the answers.
What is the difference between the red arms and the blue arms?
The red arms (6038) are for the PRO versions (16201, 16101 PRO), the blue arms are for the standard versions. They have slightly different geometries. Always use the arms that correspond to your version.
Should I replace the arms in pairs?
Yes, it is recommended to replace the arms in pairs (left + right) to ensure symmetrical geometry. If you replace only one arm, the vehicle may pull slightly to one side.
Pro tip to extend lifespan
After each session, visually inspect your suspension arms. Look for cracks or deformations. Replace a cracked arm before it breaks completely: this prevents damage to other parts during the break.