Your rear wheels no longer turn even though the motor is running? Do you only have front-wheel drive left? The rear drive shaft is the part that transmits power from the central differential to the rear wheels. When it breaks, you lose rear traction and your vehicle becomes front-wheel drive only.
This Rear Drive Shaft 16101-6029 is the exact original part factory-installed on your SCY. It instantly restores full 4x4 transmission, allowing you to regain traction on all four wheels.
What This Drive Shaft Changes for Your RC
⚡ 4x4 Traction Restored: This shaft transmits power to the rear wheels. You instantly regain full all-wheel drive and original performance.
💪 Original Strength: This shaft is made from the same material as the original part. It offers the same resistance to torsional stress.
🎯 Perfect Fit: The dimensions are exactly identical to the original part. The shaft installs perfectly without play or excessive friction.
🔧 Simple Installation: Remove the old shaft, install the new one, and you’re done. 15 minutes flat.
Verified Compatibility
This drive shaft is compatible with the following models:
• SCY 16201 • SCY 16102 • SCY 16103
Technical Specifications
Reference: 16101-6029
Type: Original rear drive shaft
Function: Power transmission to rear wheels
FAQ: Drivers’ Questions
Expand to see the answers.
How can I tell if my rear drive shaft is broken?
If the motor runs but only the front wheels turn (the rear wheels do not), the rear drive shaft is probably broken. Visually inspect it: if you see the shaft in two pieces or cracked, it must be replaced immediately.
Does installation require special tools?
No, a simple Phillips screwdriver is enough. You need to partially disassemble the chassis to access the rear shaft, remove the old one, install the new one, and reassemble. Allow 15-20 minutes if you are familiar with your vehicle.
Pro tip to extend its lifespan
Avoid sudden locking of the rear wheels (for example, hitting an obstacle at full speed). These shocks transmit huge torsional stresses to the shaft and can break it instantly. After each session, visually check the shaft: any emerging crack should be addressed before it becomes a complete break.