Radio Receiver 16101-6313 (ESC Brushless 35A) - Spare Part SCY 16101 PRO
Regular price
49,90€
Sale price
49,90€
Regular price
Unit price/ per
Sale
Sold out
x1
1
article
49,90€
5% discount
x2
2
items
99,80€
94,82€
10% discount
x3
3
items
149,70€
134,73€
In stock | Ships within 24/48 hours
Be careful, there are only
items in stock!
Victim of his own success
15
In stock | Ships within 24/48 hours
Couldn't load pickup availability
Faulty ESC = total loss of control
Your SCY PRO no longer responds to commands? The brushless motor won’t start or suddenly stops mid-run? The ESC (Electronic Speed Controller) overheats excessively? These symptoms indicate a faulty ESC. The electronic speed controller (ESC) is the brain that controls the brushless motor. When it fails, all power and control disappear.
This Suchiyu 35A Brushless ESC (Ref. 16101-6313) is not a generic ESC. It is the exact controller factory-installed on the brushless PRO versions of the SCY. Its 35A capacity is calibrated to handle the original brushless motor’s power without overheating. It also integrates the 2.4GHz radio receiver, combining motor control and radio reception in a single compact unit.
What a new ESC changes for your RC
⚡ Restored Power: A new ESC restores full control of the brushless motor. You instantly regain the original sharp acceleration and top speed.
🌡️ Optimal Thermal Management: This 35A controller is sized to handle the motor’s power without overheating. It runs at a reasonable temperature even under intensive use.
📡 Integrated Receiver: This module combines ESC and 2.4GHz radio receiver. You replace two components with a single installation, simplifying setup and reducing wiring.
🔧 Plug & Play Installation: Unplug the old ESC, plug in the new one, rebind the transmitter, and you’re done. No complex programming, no adjustments needed.
Verified Compatibility
This controller is the exact part factory-installed on the following models:
• SCY 16101 PRO (brushless version) • SCY 16201 PRO (brushless version)
⚠️ Warning: This ESC is designed for brushless motors. It is NOT compatible with standard brushed versions (16101/16102).
Technical Specifications
Manufacturer Reference: 16101-6313 (also known as code 6313)
Type: 35A Brushless ESC with integrated 2.4GHz radio receiver
Capacity: 35A continuous
Voltage: 2S LiPo (7.4V)
Compatibility: SCY PRO brushless motors
FAQ: Pilots’ Questions
Expand to see the answers.
How do I know if my ESC needs to be replaced?
Several signs: the motor won’t start, it suddenly stops mid-run, the ESC overheats excessively (too hot to touch), or you smell burning. If the ESC’s LED blinks abnormally, consult the manual to decode the error code.
Do I need to reprogram the ESC after installation?
No, this ESC is pre-programmed with Suchiyu factory settings. You just need to rebind (pair) the transmitter with the new integrated receiver. Check your transmitter’s manual for the binding procedure.
Pro tip to extend the ESC’s lifespan
Avoid prolonged wheel lock-ups (when the motor strains against an obstacle). This puts huge stress on the ESC and can burn it out. If the wheels lock, immediately release the trigger. Also ensure the ESC is well ventilated and no debris blocks its cooling fins.