Brushed Motor 16101-6049 (Brushed) - Spare Part SCY 16101 16102
Regular price
29,90€
Sale price
29,90€
Regular price
Unit price/ per
Sale
Sold out
x1
1
article
29,90€
5% discount
x2
2
items
59,80€
56,82€
10% discount
x3
3
items
89,70€
80,73€
In stock | Ships within 24/48 hours
Be careful, there are only
items in stock!
Victim of his own success
15
In stock | Ships within 24/48 hours
Couldn't load pickup availability
Overheating Motor = Dropping Performance
Has your SCY lost its punch? Is the acceleration no longer as sharp as before? Does the motor overheat abnormally after a few minutes of driving? These symptoms don’t lie: your brushed motor is nearing the end of its life. The brushes wear out, the magnets lose their magnetism, and the bearings seize up. The result: less torque, less speed, and a risk of overheating that can damage your ESC.
This Original Suchiyu Brushed Motor (Ref. 16101-6049) is not a generic replacement motor. It is the exact motor factory-installed on the brushed versions of the SCY 16101 and 16102. Its electrical characteristics (voltage, KV, torque) are calibrated to work perfectly with the original ESC.
What a New Motor Changes for Your RC
⚡ Restored Power: A new motor regains the original torque and top speed. You instantly recover the performance you had when you first unpacked your vehicle.
🌡️ Controlled Temperature: A worn motor overheats excessively, reducing its efficiency and potentially damaging the ESC. This new motor runs at an optimal temperature, even under intensive use.
🔋 Extended Runtime: A motor in good condition consumes less energy to produce the same power. You gain several extra minutes of runtime per battery charge.
🔧 Plug & Play Installation: This motor comes with its pinion gear installed. You unscrew the old motor, screw in the new one, reconnect the cables, and you’re done. No adjustments, no complications.
Verified Compatibility
This motor is the exact part factory-installed on the following models:
⚠️ Warning: This motor is NOT compatible with PRO (brushless) versions. PRO versions use a different brushless motor.
Technical Specifications
Manufacturer Reference: 16101-6049 (also known as code 6049)
Type: Brushed motor with installed pinion gear
Voltage: 7.4V (compatible with 2S LiPo battery)
Compatibility: Original SCY brushed ESC
FAQ: Pilots’ Questions
Expand to see the answers.
How do I know if my motor needs to be replaced?
Several signs: gradual power loss, overheating after a few minutes, unusual noises (squeaking, clicking), or a burnt smell. If your motor gets so hot you can’t touch it after 5 minutes of driving, it’s time to replace it.
Can I install a brushless motor instead?
No, not directly. Brushless motors require a specific brushless ESC. If you want to switch to brushless, you must replace both the motor AND the ESC (upgrade to PRO version).
Pro tip to extend motor life
Avoid repeated harsh starts and wheel lock-ups (when the motor strains against an obstacle). After each session, let the motor cool down before storing the vehicle. Never drive through water: moisture destroys brushes and bearings.